Pipe Supports
Pillow Block Supports
For electrical conduit, gas lines, solar lines, and small mechanical piping that is close to the roof.
For conduit and condensate 1.5" and smaller
For conduit and condensate 3" and smaller
Supports pipe 3" and smaller at 2" above roof
Supports pipe 3" and smaller at 4" above roof
Roller Supports
For gas lines, water and steam lines and more ranging in size from 3" to 10". Designed specifically for use in expansion/contraction applications, these supports all use a self-lubricating roller to absorb both longitudinal and lateral pipe movement.
Supports 3" pipe up to 8" above roof
Supports 3" pipe up to 12" above roof
Supports 4" pipe up to 10" above roof
Supports 4" pipe up to 14" above roof
Supports 5" pipe up to 8" above roof
Supports 5" pipe up to 12" above roof
Supports 6" pipe up to 8" above roof
Supports 6" pipe up to 12" above roof
Strut Supports
For conduit and other small electrical piping. Uses channel strut to allow for the addition of pipe clamps, and ranges in height from 2.5" to 18", and in widths up to 48".
8" wide and 2" above roof
8" wide and 5" above roof
8" wide and 8" above roof
8" wide and 12" above roof
12" wide and 8" above roof
12" wide and 12" above roof
16" wide and 8" above roof
16" wide and 12" above roof
20" wide and 4" above roof
20" wide and 8" above roof
20" wide and 18" above roof
24" wide and 5" above roof
Custom Pipe Supports
For larger systems MIRO Industries has the capability to design and fabricate project-specific pipe supports, made specifically for each unique application. A variety of hanger types are available.
Wind & Seismic Pipe Supports
MIRO has an in-house engineering team capable of designing support systems that will meet code requirements for high-wind and seismic zones.