Model 16-Base Strut-7 | Base: Polycarbonate and Stainless Steel

16″ strut pipe support system used for ganging roof-mounted piping

Downloads

Polycarbonate

  1. Spec & Drawing Sheets (PDF)
  2. Spec & Data Sheets (PDF)
  3. Drawings (REVIT)
  4. Drawings (DWG)

Stainless Steel

  1. Drawing Spec (PDF)
  2. Spec List (PDF)
  3. Drawings (REVIT)
  4. Drawings (DWG)
SKU: 16-BS-7. Category: .

A pipestand with a strut and clamp pipe support system used for ganging roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 16″ length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut.


Base Material:

Polycarbonate or Stanless Steel



Size:

The deck base is 9″ by 15.25″, has a maximum bar length of 16″.


Max Clearance:

Can adjust in height from a low of 4.25″ to a high of 7″ in elevation above the roof membrane.



Max Load Weight:

Maximum load weight may not exceed 223 lbs. per pipestand.



Spacing:

Manufacturers recommended spacing is not to exceed 10 foot centers depending upon the load.

Accessories