Model 16-Base Strut-12

16″ strut pipe support system used for ganging roof-mounted piping


  1. Spec & Drawing Sheets (PDF)
  2. Spec & Data Sheets (PDF)
  3. Drawings (REVIT)
  4. Drawings (DWG)
SKU: 16-BS-12. Category: .

A pipestand with a strut and clamp pipe support system used for ganging roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 16″ length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut.

Base Material:



The deck base is 9″ by 15.25″, has a maximum bar length of 16″.

Max Pipe Size:

Max Pipe Clearance:

Can adjust in height from a low of 2.5″ to a high of 12″ in elevation above the roof membrane.

Max Load Weight:

Maximum load weight may not exceed 223 lbs. per pipestand.


Manufacturers recommended spacing is not to exceed 10 foot centers depending upon the load.

Installation Photos: